Lawrence Berkeley National Laboratory masthead Search Jobs Phone Book U.S. Department of Energy logo Berkeley Lab masthead A-Z Index




Local exhaust ventilation hoods and points are required for many operations to ensure reduction of airborne concentrations of contaminants that could pose risk to employees. Hoods include, for example, laboratory fume hoods, soldering bench hoods, extractor arms, gloveboxes, and other exhausted equipment enclosures that perform a safety or health function.

EH&S conducts surveys and calibrations on a schedule that depends on use and type of the hood or ventilation system. The results of all calibration, certification and other checks are recorded in an EH&S Ventilation database, which is considered the point of record. Additionally, most systems have stickers on them that indicate when the last check was performed.

Click here to log in to the Ventilation database.

EH&S establishes minimum standards of performance for each hood or system based upon code requirements, nationally recognized standards, and good professional judgment. The performance standard for each hood is listed in the computerized record for that hood. It is the responsibility of the responsible line manager to ensure that a deficient hood is fixed, and to use the hood within its safety limits until it is fixed.

New local exhaust ventilation systems and hoods must meet the requirements of Building and Fire Codes and industry standards, and each hood must have a monitor that quantitatively displays the hood’s performance to the hood user.

For more information on survey and calibration schedules or ventilation deficiencies, see Chapter 4.6 in Pub3000.

If you have any questions or comments, please contact Laurel Davis, x2324 (